Remove-It Extreme Residue Remover

FREE UK Delivery* | Pay With Klarna

KlarnaFrom £2.67 p/m

£31.99 inc VAT

Our Extreme Residue remover is designed to be used on porcelain tiles and stone to aid the cleaning process. Part of the Remove-It range of external cleaning solutions, our extreme residue remover is a safe, non-acidic, easy-to-use cleaning powder. It will help remove built-up dirt and traffic wear, and stubborn marks and build-ups to produce an even clean matt finish.

Warning: Not for use on polished surfaces.

  • Removes built-up dirt and traffic wear
  • Removes stubborn marks and build-ups
  • Produces an even clean matt finish
  • Not for use on polished surfaces
SKU: Cleaner7 Categories: ,

Our extreme residue remover is part of the Remove-It range of external cleaning solutions. Our Remove-It Extreme Residue Remover is a safe, non-acidic, easy-to-use cleaning powder designed to be used on porcelain tiles and stone to aid the cleaning process. It will help remove built-up dirt and traffic wear, and stubborn marks and build-ups to produce an even clean matt finish.

 

Due to the nature of different surfaces, you should do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end-user must determine the suitability of the product for their intended use.

This will take the shine off marble, limestone, and polished surfaces.

Note: not for use on polished surfaces

Directions

  1. The surface must be free of all surface sealers and coatings.
  2. Sweep, vacuum, or wipe the surface.
  3. Sprinkle Extreme Residue Remover onto the surface in a manageable area.
  4. Add clean water to create a firm slurry.
  5. Use a scourer and then start the cleaning process.
  6. Do not allow the product to dry – add water to the slurry as required.
  7. Continue until the desired effect has been achieved. Note: Use a squeegee to check your progress.
  8. Remove the slurry and rinse thoroughly with clean water and a mop or scrubber drier.
  9. Repeat the process as necessary.

Limitations

Do not mix with chemicals other than TT Paving Solutions products or allow the product to come into contact with any non-recommended surfaces.

Coverage

The coverage will vary depending on the surface type (rough or smooth tiles) and the severity of the staining.

 

Warning

Storage advice
Close the container tightly after each use. Store in original container only. Store in temperature between 40C and 320C.

First aid
For advice contact a doctor. If swallowed, DO NOT induce vomiting. Immediately drink at least 3-4 glasses of water. If in the eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. If irritation persists, seek medical attention. In case of an accident or if you feel unwell, seek medical advice immediately.

Safety directions
Avoid contact with skin and eyes.

Must read the entire label before use. It is the user’s responsibility to determine the suitability of the product for the intended use.