Highland Lava Install
Highland Lava Install

Highland Engineered Stone Cladding Project Pack

FREE UK Delivery* | Pay With Klarna

KlarnaFrom £156.25 p/m

£1,875.00 inc VAT

25m2 Project Pack – Equivalent of 75.00 m2

Highland is engineered stone cladding available in several  colours this product is suitable for both internal & external use and is available on a bespoke basis supplied as a project pack of 25m2  and due to the bespoke nature of this product a lead time will apply.

  • Produced with 100% natural recyclable materials
  • Not quarried or mined – unharmful to natural resources
  • Low emitting material classified as A+
  • A+ certified for emission of volatile organic compounds
  • Lightweight material – energy saving transport – less CO2 emissions
  • Lightweight material – requires less reinforcement of the concrete substrate
  • Sustainable production system – energy saving – less CO2 emissions
  • Sustainable waste management – production leftovers are recycled and reproduced to new stone veneers or brick slips
  • Insulation properties – energy saving – less CO2 emissions
  • All stones and bricks packed in cardboard boxes made from recycled material
  • Suitable for internal & external usage
  • 30 Year manufacturers guarantee.
  • This is a Made To Order Product and a lead time applies.

Available  colours – Lava, White, Silver, Rusty / Corner pieces also available

To enquire about this range or receive a bespoke quotation  please email info@premierporcelain.co.uk

A standard project pack contains 25m2 please add the item to your basket  please inform us of the desired colour required via the additional information form at checkout. To enquire about this range or receive a bespoke quotation  please email info@premierporcelain.co.uk

Available on back-order

Add To Wishlist
View Wishlist
Share
SKU: Highland Engineered Stone Cladding Categories: , , , ,

Highland Engineered Stone Cladding

Produced with 100% natural recyclable materials
Not quarried or mined – unharmful to natural resources
Low emitting material classified as A+
A+ certified for emission of volatile organic compounds
Lightweight material – energy saving transport – less CO2 emissions
Lightweight material – requires less reinforcement of the concrete substrate
Sustainable production system – energy saving – less CO2 emissions
Sustainable waste management – production leftovers are recycled and reproduced to new stone veneers or brick slips
Cooperation with cement companies committed to preserving sustainable development
Thermic insulation properties – energy saving – less CO2 emissions

Isola Dimensions.png

 

ALV Corner 1

 

Installation

Lay out 1 – 2m of the stones on the floor in front of one corner of surface

Lay out 1 – 2m of the stones on the floor in front of one corner of surface

Arrange the stones in the correct order or your desired pattern 

Apply adhesive to the installation surface then onto the entire back of eachallations on ICF block, timber or over 3m a concrete substr

Lay out 1 – 2m of the stones on the floor in front of one corner of surface

Arrange the stones in the correct order or your desired pattern

Apply adhesive to the installation surface then onto the entire back of each stone and install

If the installation includes corners, begin with these and continue the installation in line with the flats

Any gaps at the edges or in the wall can be filled by easily cutting the stones with an angle grinder

For installations with joints, spacers can be used and then grouted with a grouting gun

For installations on ICF block, timber or over 3m a concrete substrate primer would need to be applied to the surface pre-installation

​Once the stones have been installed and grouted (if the stone requires grout) leave for 48 hours to set then brush off any excess dirt or dust and then apply the matt clear protective stone sealant.

would need to be applied to the surface pre-installation

​

Once the stones have been installed and grouted (if the stone requires grout) leave for 48 hours to set then brush off any excess dirt or dust and then apply the mat clear protective stone sealant

Arrange the stones in the correct order or your desired pattern 

Apply adhesive to the installation surface then onto the entire back of each stone and install

If the installation includes corners, begin with these and continue the installation in line with the flats 

Any gaps at the edges or in the wall can be filled by easily cutting the stones with an angle grinder

For installations with joins, spacers can be used and then grouted with a grouting gun

For installations on ICF block, timber or over 3m a concrete substrate primer would need to be applied to the surface pre-installation

​

Once the stones have been installed and grouted (if the stone requires grout) leave for 48 hours to set then brush off any excess dirt or dust and then apply the mat clear protective stone sealant

Related products